Kwik-Way Online Store


Kwik-Way High Precision Small Valve Collet Chuck Kit

$410.55




  • Model: 012-1575-60
  • Shipping Weight: 1lbs
Add to Cart:


True to the heritage of Kwik-Way Products, this Small Collet Chuck is all about High Precision.  Our engineers have worked hard to bring you a solution for refacing small valves with the high level of accuracy you've come to expect from the Kwik-Way brand along with consistent repeatability. 

For Grinding Small Valves

When you want to grind small valves found in 4-valve cylinder heads, motorcycles and other small engines and they just don't quite fit in your Valve Refacer chuck, this kit is what you want.

We've done the homework and found what is arguably the best of the best for a small valve collet chuck.  Because when you use one of these, you are stacking your tolerances, so you want the very best quality you can get.  Every little error means an even greater error in your finished valve job.  So don't settle for less.

Quality Components

The hardened steel body of this chuck adaptor fits any machine with a 1/2" chuck. Use different sizes of collets to easily adapt to the size valve stem you're working with. The collets seat in the retainer nut for fast, easy removal and come in 4 sizes from 3.0mm to 6.0mm.

An internal stop adjusts for valve stem length and adjusts easily with the included hex key. 

Our Chuck Extension Rod has features not found on cheaper knock-offs.  For example, the threads of the stop screw have flats to accommodate a wrench so if you ever get a collet stuck, you'll have a way of putting a wrench on both the shaft and the stop screw.  With other Extension Rods, you would be forced to clamp your Rod and risk damage to its precision straightness.  These are the kinds of little features that you only find on the "top-of-the-line" tools and it's what we demand for our customers.

Easy to Use

To use, simply insert valve that is to be ground in the Chuck Extension Rod using the correct-sized collet, then insert the Chuck Extension Rod into the valve grinding machine chuck as you would a standard size automotive valve. The high precision, industrial quality chuck, and collets ensure minimal run-out. Don't be fooled by cheap imitations. We use only top quality, brand chucks, and collets in our kits that our factory machinists use every day and highly recommend.

Kit includes:

  • The extension rod
  • a valve stop
  • a valve stop hex key
  • 4 collets sized in 3mm, 4mm, 5mm, and 6mm
  • a handy small plastic case to hold all the pieces in
  • a set of instructions on how to use the kit.

And if you need an in-between size of collet we have those available also.  Just look for the Kwik-Way HP Optional Collets here on this website.


This product was added to our catalog on Tuesday 30 November, 1999.

Your IP Address is: 54.198.15.20
Copyright © 2018 Kwik-Way Store. Powered by Zen Cart

All Information Displayed on this Website is intended for US Domestic customers only.
International Customers Should Contact Their Local Distributor or Write to Us at international@kwik-way.com for a quote.

Parse Time: 0.280 - Number of Queries: 143 - Query Time: 0.090514358764648