Kwik-Way Online Store

Micro Switch - SVSII / 208-II


  • Model: 000-1201-02
  • Shipping Weight: 0.02lbs
Add to Cart:

Micro switch, located on the back of the SVSII series valve refacers. This switch turns off the power to the machine's motors when the slide is traversed all the way to the right. This switch is also used on the SVSIID chuck slide to deactivate the chuck motor when the air chuck is engaged. You will also find this switch used on the Kwik-Way model 208II valve tumbler.


NOTE: This switch uses 2 metric nuts to hold it in place. If the switch you are replacing does not use this size of nuts or if you have lost the nuts from your old switch you will need 2 of part number 000-1100-32 a 12MM x 0.75 x 2.5 Hex Nut.LOOK AT YOUR SWITCH AND BE SURE IT MATCHES THIS PICTURE.


This product was added to our catalog on Tuesday 30 November, 1999.

Your IP Address is:
Copyright © 2019 Kwik-Way Store. Powered by Zen Cart

All Information Displayed on this Website is intended for US Domestic customers only.
International Customers Should Contact Their Local Distributor or Write to Us at for a quote.

Parse Time: 0.201 - Number of Queries: 155 - Query Time: 0.07924856427